| Please click here to visit the "Military Carbine Components Guide" for additional info and photos of the various components used on this model. |
HISTORY / BACKGROUND:
This was the final "all A1 Component" Carbine Model in the Colt 600 Series, and the second carbine
configuration built with a 14.5" barrel. This Carbine was primarily used by US Special Operations, to
include the Army Rangers and Navy SEALs. The only differences between the Model 653 and the 654
was the presence of the Forward Assist on the Model 653, and the lack of a Forward Assist on the
Model 654.
______________________________________________________________________________
This was the final "all A1 Component" Carbine Model in the Colt 600 Series, and the second carbine
configuration built with a 14.5" barrel. This Carbine was primarily used by US Special Operations, to
include the Army Rangers and Navy SEALs. The only differences between the Model 653 and the 654
was the presence of the Forward Assist on the Model 653, and the lack of a Forward Assist on the
Model 654.
______________________________________________________________________________
BUTTSTOCK:
STYLE:
2nd Generation Collapsing Stock
MATERIAL:
Aluminum Body coated with Vinyl-Acetate
_________________________________________________________________________________________________
BUFFER GROUP:
BUFFER:
Standard Carbine Buffer
SPRING:
Standard Carbine Spring
TUBE:
2-Position Tube
_________________________________________________________________________________________________
LOWER RECEIVER:
STYLE:
Full Fence
MARKINGS:
_________________________________________________________________________________________________
UPPER RECEIVER:
PROOF MARKS / FORGE CODE:
Colt Forge Mark inside Carry Handle
below Rear Sight.
See the Component Guide for a
listing of Forge Codes.
REAR SIGHT:
Standard "Late Production" A1 Sight
EJECTION PORT COVER:
"Late A1 Production" Type
FORWARD ASSIST:
Initially produced with the "Original"
Tear Drop Assist.
Later fielded with the "Early"
Round Assist.
_________________________________________________________________________________________________
BOLT GROUP:
Standard Colt Bolt Group
with a "C" marked Carrier,
and a "MPC" marked Bolt
_________________________________________________________________________________________________
HANDGUARD SLIP RING:
Flat
_________________________________________________________________________________________________
BARREL:
DIAMETER:
0.625" at the Front Sight Base
LENGTH:
14.5"
TWIST RATE:
1/12
MARKINGS:
"Early" - C MP B
M = Magnetic Particle Inspected
P = Proof Fired
B = Chrome Bore
"Late" - C MP Chrome Bore
_________________________________________________________________________________________________
HANDGUARDS:
Carbine Handguard
with Single Heat Shield
_________________________________________________________________________________________________
FLASHHIDER:
A1 "Birdcage"
STYLE:
2nd Generation Collapsing Stock
MATERIAL:
Aluminum Body coated with Vinyl-Acetate
_________________________________________________________________________________________________
BUFFER GROUP:
BUFFER:
Standard Carbine Buffer
SPRING:
Standard Carbine Spring
TUBE:
2-Position Tube
_________________________________________________________________________________________________
LOWER RECEIVER:
STYLE:
Full Fence
MARKINGS:
_________________________________________________________________________________________________
UPPER RECEIVER:
PROOF MARKS / FORGE CODE:
Colt Forge Mark inside Carry Handle
below Rear Sight.
See the Component Guide for a
listing of Forge Codes.
REAR SIGHT:
Standard "Late Production" A1 Sight
EJECTION PORT COVER:
"Late A1 Production" Type
FORWARD ASSIST:
Initially produced with the "Original"
Tear Drop Assist.
Later fielded with the "Early"
Round Assist.
_________________________________________________________________________________________________
BOLT GROUP:
Standard Colt Bolt Group
with a "C" marked Carrier,
and a "MPC" marked Bolt
_________________________________________________________________________________________________
HANDGUARD SLIP RING:
Flat
_________________________________________________________________________________________________
BARREL:
DIAMETER:
0.625" at the Front Sight Base
LENGTH:
14.5"
TWIST RATE:
1/12
MARKINGS:
"Early" - C MP B
M = Magnetic Particle Inspected
P = Proof Fired
B = Chrome Bore
"Late" - C MP Chrome Bore
_________________________________________________________________________________________________
HANDGUARDS:
Carbine Handguard
with Single Heat Shield
_________________________________________________________________________________________________
FLASHHIDER:
A1 "Birdcage"
| ______________________________________________________________________________ COLT MODEL 653 - "IN THE FIELD" |
| Unknown Date & Location US Navy SEAL on Training Mission Shown with the "Early" Round Forward Assist |
| 1982 - US Military Base US Army Air Cav on Training Mission Shown with the "Original" Tear Drop Forward Assist |
RETRO BLACK RIFLE - CARBINE GUIDE - MODEL 653 & 654
 | |  | |  | |  | |  | |  | |  |
| .223 Cal / 5.56mm MILITARY CARBINE GUIDE |
